PRIMERS
-
![]()
MICOROX® 103 PRIMER
MICOROX® 103 PRIMER is a multipurpose primer and sealer, based upon a unique chemistry that allows the application of MICOROX® products, including resurfacers, liners and coatings to green concrete. MICOROX® 103 PRIMER is applied to eliminate the conventional 28 day cure time by deeply penetrating into the pores of the fresh concrete surface, and bonding securely to the concrete and the overlayment as well. This primer/sealer provides substantial savings in both cost and downtime.
MICOROX® 103 PRIMER is an ideal substitute for curing compounds, hardeners, or sealants for new concrete because it prevents the rapid dehydration of new concrete and elminates concrete dusting, resulting in a better cure and higher concrete strengths.
-
![]()
MICOROX® 25-86 PRIMER/SEALER
MICOROX® 25-86 PRIMER/SEALER is a two component, 100% solids epoxy resin based product designed as a flexible primer or binder for Decorative Flooring. It is intended for use in areas where thermal or mechanical shock and minor substrate movement is expected. 25-86 will penetrate and seal small cracks and function as a membrane under other flooring systems.
AREAS OF APPLICATION:
Concrete floors
Secondary containment areas
Warehouses
Industrial facilities
Paper Mills
Food Processing Plants
Mechanical Rooms
-
![]()
MICOROX® PVE PRIMER
MICOROX® PVE PRIMER is a single compound urethane primer designed to insure the maximum adhesion of polyester and vinyl-ester systems to concrete, steel and other surfaces.
Although designed primarily as a primer MICOROX® PVE PRIMER offers superior abrasion and chemical resistance compared to other moisture cured urethanes when used as a concrete sealer.
-
![]()
MICOROX® 287 PRIMER
MICOROX® 287 PRIMER is a multipurpose, 40% solids primer that allows the application of other MICOROX* products, including resurfacers, liners, and coatings to old or green concrete.
MICOROX® 287 PRIMER is applied to eliminate the conventional 28 day cure time by bonding to the fresh concrete surface and providing a chemical bond to the top coal.
MICOROX® 287 PRIMER is moisture tolerant, has no odor and zero voc. It will typically reduce moisture transmission by better than 50% with one application.
We encourage you to review each of these products. Download the individual PDF fact sheets from each section for more information and then contact one of our representatives to assist you in choosing the right product for your specific needs.
-
MICOROX® 103 PRIMER is a multipurpose primer and sealer, based upon a unique chemistry that allows the application of MICOROX® products, including resurfacers, liners and coatings to green concrete. MICOROX® 103 PRIMER is applied to eliminate the conventional 28 day cure time by deeply penetrating into the pores of the fresh concrete surface, and bonding securely to the concrete and the overlayment as well. This primer/sealer provides substantial savings in both cost and downtime.
MICOROX® 103 PRIMER is an ideal substitute for curing compounds, hardeners, or sealants for new concrete because it prevents the rapid dehydration of new concrete and elminates concrete dusting, resulting in a better cure and higher concrete strengths.
-
MICOROX® FLOORLIFE™ PRIMER is a 77% non-volatile primer designed to improve the adhesion of trowelled, slurry or roller applied coatings to concrete and ther substrata. It features low viscosity for deep penetration, long working life and outstanding adhesion.
MICOROX® FLOORLIFE™ PRIMER Is designed for use under all FLOORLIFE™ 3-part trowel or slurry applied systems.
-
MICOROX® PVE PRIMER is a single compound urethane primer designed to insure the maximum adhesion of polyester and vinylester systems toconcrete, steel and other surfaces.
Although designed primarily as a primer MICOROX® PVE PRIMER offers superior abrasion and chemical resistance compared to other moisture cured urethanes when used as a concrete sealer.
-
MICOROX® 23-33 is 100% solids, 2 part epoxy floor primer/ sealer. IT features extremely rapid thin films set even at reduced temperatures. In addition to rapid cure, it provides excellent adhesion and resistance to a wide variety of chemicals.
-
MICOROX® 287 PRIMER is a multipurpose, 40% solids primer that allows the application of other MICOROX®products, including resurfacers, liners, and coatings to old or green concrete.
MICOROX® 287 PRIMER is applied to eliminate the conventional 28 day cure time by bonding to the fresh concrete surface and providing a chemical bond to the top coal.
287 PRIMER is moisture tolerant, has no odor and zero voc. It will typically reduce moisture transmission by better than 50% with one application.
-
MICOROX® 25-86 PRIMER/SEALER is a two component, 100% solids epoxy resin based product designed as a flexible primer or binder for Decorative Flooring. It is intended for use in areas where thermal or mechanical shock and minor substrate movement is expected. 25-86 will penetrate and seal small cracks and function as a membrane under other flooring systems.
AREAS OF APPLICATION:
-Concrete floors
-Secondary containment areas
-Warehouses
-Industrial facilities
-Paper Mills
-Food Processing Plants
-Mechanical Rooms