EPOXY GROUTS

Grouts For Machinery Mounting and Anchoring

Micorox epoxy grout is a fast setting 100% solids epoxy systems which yields exceptionally high strength and needs minimal surface preparation. That means installation is quick and trouble free, virtually eliminating costly machine down time.
Material, equipment and labor costs are greatly reduced too! In most cases machines can be reset without removal-just raise, level the machine, and re-grout it. Anchoring bolts is a quick and efficient job with Micorox; just drill a hole slightly larger than the bolt and pour in the Micorox grout to anchor as desired. Normally, operation can be resumed within 6 hours.

  • Our Micorox grouts are fast setting 100% solid epoxy systems with exceptionally high strength that need minimal surface preparation for anchoring and installing heavy industrial machinery. Industries that use our  grout include food plants, pharmaceutical plants, chemical plants, battery plants, institutional facilities and pulp and paper mills.

    Equipment that use our epoxy grout are: Compressors, Lathes, Pumps, Engines, Electric Motors, Generators, Presses, Crushers, Paper Machines, X-ray Machines, Grinders, Truck Scales, Punches, Hoist and Jib-Crane Bases.

    Installation is quick and trouble free, virtually eliminating costly machine down time.
 Material, equipment and labor costs are greatly reduced using our systems of machinery mountings.
    In most cases machines can be reset without removal – just raise and level the machine and re-grout it. Anchoring bolts installation is a quick and efficient job with Micorox epoxy grout. Normally, full operation of the machinery can be resumed within 6 hours of mounting machinery or replacing existing mounting bolts.

  • QUICK ACHIEVEMENT OF STRENGTH

    Develop compressive strength in only six hours and machine is operable. Mill-wright costs and downtime are minimized.

    SMOOTHER MACHINE OPERATION

    Micorox Grouts high flow rate and penetration offers minimal shrinkage, complete fill under machine bases. . . fills cracks and voids to rebuild and strengthen foundations and absorb impact and vibrations

    QUICK REGROUTING

    Micorox grouting techniques eliminate removal and resetting of your machine in many cases. Just raise and re-level – then re-grout. Reduce downtime from weeks to as little as one day.

    EASIER SETTING OF ANCHORBOLTS

    Eliminate expensive equipment for punching wide holes in concrete. All you have to do is drill a hole the size of the bolt-head and grout.

    HIGH CHEMICAL RESISTANCE

    Once set up, Micorox Epoxy Grouts are unaffected by water, humidity, oil, grease and most chemicals.

    CONVENIENT ALL IN ONE PACKAGE

    All components are packed in the mixing container. Materials are pre-proportioned for easy mixing and placing. Micorox Grouts are just a few of the industrial and commercial polymer systems available from Micor Co., Inc. Other unique products include:

    • Specialty flooring systems: industrial and commercial.

    • Complete line of industrial polymer tank liners and backing systems.

    • Level Machine with 1/4″­3/4″ Clearance for grout

    • Dam Perimeter Leaving Adequate Venting for grout

    • Mix Micorox Grout (2 – 3 minutes)

    • Pour Under Machine and Let grout harden

  • A large bucket and a smaller bottle of Micor epoxy resin grout and hardener, used for industrial applications, with prominent warning labels.

    MICOROX® X-TRA FLUID GROUT L/O (LOW ODOR)

    MICOROX® X-TRA FLUID GROUT L/O (LOW ODOR) combines Superior Flow rates, High Physical Strengths and Color Matching capabilities with LOW ODOR to provide a low Viscosity grout for use in healthcare or commercial environments where safety, appearance and performance are important.

    Download the Micorox X-TRA Fluid Grout, L-O Formula PDF

  • Containers of MICOR Deep Pour Grout, including a white bucket labeled 'Resin Part A,' a clear jug labeled 'Hardener Part B,' and two brown paper bags.

    MICOROX® DEEP POUR GROUT

    MICOROX® DEEP POUR GROUT is a three component, 100% solids epoxy system used in grouting heavy machinery and other equipment to thicknesses of 12 inches. Unlike Deep Pour is far superior to cement grouts. It provides resistance to high impact, vibration, torque loads and other stresses and offers corrosion resistance to water, oil, solvents and a wide variety of other chemicals.

    Deep Pour Grout substantially reduces long term grouting costs since it is not subject to the failures associated with cement and iron-filled cement grouts. Deep Pour Grout offers cured strengths of 13,820 psi to 17,000 psi.

    Download the Micorox Deep Pour Grout PDF

  • Stats

    MICOROX® STANDARD GROUT

    MICOROX® STANDARD GROUT is an exceptionally high strength, fast setting epoxy material designed for grouting, regrouting and anchoring equipment. The product is a two-component, 100% solids epoxy with superior flow rates for easy penetration under machine bases or sole plates.

    The grout resists vibration and impact and has compressive strengths up to 16,800 psi. This outstanding material may also be used to construct level bases without transits or other leveling equipment, and is ideal for anchoring bolts.

    Use Standard Grout when clearance is 1/2 to 1 inch.

    Download Micorox Standard Grout PDF

  • Micor Novolac Deep Pour Grout Resin and Hardener with packaging in the background.

    MICOROX® NOVOLAC DEEP POUR GROUT

    MICOROX® NOVOLAC DEEP POUR GROUT Is an exceptional high strength, industrial epoxy designed for grouting and anchoring heavy equipment to thickness' of 12 inches. Superior to cementitious grouts, our three-component Novolac epoxy grout eliminates costly failures due to curing cracks, expansion, corrosion breakdown and oil degradation.

    Superior formulation insures negligible shrinkage, excellent resistance to a broad range of chemical and abrasive conditions, resistance to vibration, torque loads, high impact and other stresses to provide outstanding load bearing stability.

    Novolac epoxy grout complements our Standard and X-tra Fluid Grouts which are used when access under the base is one inch or less. U.S.D.A. approved for incidental food contact.

    Download the Micor Novolac Deep Pour Grout PDF

  • Micor Backing Grout container and bottle, epoxy resin and hardener

    MICOROX® BACKING GROUT

    MICOROX® BACKING GROUT is a 100% solids epoxy resin compound formulated for backing wear metal in all types of crusher and grinding mills.

    It combines high-impact resistance, superior compressive strength, non-flammability, high stability and low shrinkage in one system.

    Download the Micor Backing Grout PDF